Ducato Goods Transport


Model overview

    Range and load capacity

    A huge variety of combinations, for endless transport solutions

    Van

    Generous in volume, generous in capacity
    • 3 wheelbases, 4 lengths, 3 heights.
    • 7 volume options, from 8 to 17 m³.
    • Sliding side door and rear door both available in 3 different size options.
    • GVW : from 3000 to 4000 kg
    • payload from 1000 to 2000 kg
    • Maximum permitted axle loads up to 2100 kg on the front and up to 2400 kg on the rear.
    • 2 different mechanical structures, the Ducato and the Ducato Maxi with reinforced suspension and 16” wheels.

    Chassis cabs

    Functionality, capacity, practicality and comfort
    • 3 wheelbases, 4 lengths.
    • 2 types of cab, single and double.
    • GVW from 3000 to 4000 kg
    • maximum permitted axle loads 2100 kg on the front and 2400 kg on the rear, segment topping values.
    • 7 dropside dimensions with surface areas from 5.9 to 8.5
    • 2 different mechanical structures, the Ducato and the Ducato Maxi with reinforced suspension and 16” wheels.

    Accessibility

    You can make the most of every last inch of space when loading your goods

    The sliding side doors are available in 2 widths, 1075 and 1250 mm, and 2 heights, 1485 and 1755 mm.

    And not only that:

    • the upper slide rail is designed to facilitate opening and closing
    • the suitcase-style handles are easy to grip.

    A second sliding side door - off side - is available on request.

    The load compartment is extremely easy to access via the rear door:

    • the door is over 1.5 m high on the low roof version, almost 1.8 m on the high roof version, and over 2 m on the super high roof, truly a record height - meaning you have no need to tilt your goods to load them;

    Self-levelling suspension

    To keep you level at all times, irrespective of load weight and arrangement, thus increasing safety and driving comfort.

    Allows you to raise or lower the load platform when the vehicle is parked in order to:

    • make the handling of your goods easier
    • improve the ramp angle or pass over an obstacle beneath the vehicle

    Load compartment

    Always our strength

    Vans
    The load compartment is square and even, and every last bit of space can be used:

    • up to 4070 mm long
    • and up to 1662 to 2172 mm high
    • the width between the wheel arches is 1422 mm, meaning that the 1200 mm wide Euro pallets can be loaded quickly and easily
    • the flatbed can be protected by a highly resistant plastic cover
    • the interior walls can be covered in thermoformed plastic material up to the belt inserts
    • to fix and hold your load in place, 4 securing hooks are available at the sides of the load compartment, as well as several anchoring points on the floor, with a practical storage compartment system on the right hand rear door also available on request
    • a bright interior is guaranteed by the 15 W ceiling lights - an additional 12 V power point inside the load compartment is also available on request.

    The partition between the load compartment and the passenger compartment may be panelled or glazed with sliding glass.

    Trucks
    The sturdy and reliable original flatbeds are produced using state of the art materials and technologies:

    • the load platform, 2034 mm wide and 2798 to 4260 mm long, is crafted from Scandinavian timber and treated with phenol resins to ensure an anti-slip surface which is highly resistant to abrasion
    • the side boards are made of aluminium profiles, making them undeformable and light for optimised payload, 40 cm high and fitted with an access step.
    The load surface ranges from 5.9 to 8.5 m².
    Technical data

      Gallery